|All Tools Supply, Inc.||Ph: 817-483-0700|
|204 Twilla Trail||Fax : 817-444-4719|
|Azle, TX 76020||
Special purpose carbide inserts have carbide cutting surfaces that are often useful when machining through materials such as carbon steel or stainless steel, as well as in situations where other tools would wear away, such as high-quantity production runs. Sometimes, carbide inserts will leave a better finish on the part, and allow faster machining. Carbide inserts can also withstand higher temperatures than standard high speed steel tools.
To increase the life of these carbide inserts, they are coated with TiN (titanium nitride). This coating generally increases the carbide insert's hardness and/or lubricity allowing the cutting edge of the carbide insert to cleanly pass through the material without having the material gall (stick) to it. This coating also helps to decrease the temperature associated with the cutting process and further increases the life of the carbide insert.
Made in the USA by ICS Cutting Tools, Inc.
Only $2.79 ea.
Box of 10 pcs. / $27.90
(1) Box of 10 pcs.
Anywhere in the U.S.
Flat Rate Shipping : $4.49